Company

News

Products

Service

Contact

Click the "Like-Button"
to show Facebook, that you like "SCHUNK GmbH & Co.KG"

Lathe Chucks

	Manual Chucks

	Power Chucks

	Pneumatic Power Chucks
	ROTA TP
	ROTA TB
	ROTA TB-LH
	ROTA TB-LH 1000/4
	ROTA EP
	ROTA EP-LH
	Wireless Presure control RSS-P1
	Wireless Path Control RSS-W1
	ELKE 24
	ELKE 24/2 F


	Precision Chucks

	Special Chucks

	Special Solutions

	Steady Rests

	Lathe Chuck Accessories

	Chucks Technology

Chuck jaws

	Standard Chuck Jaws

	Collet Jaws

	Specialized Jaws

	Customized Jaws

	Accessories

	Technology and Operating Manuals

	Quick Finder Chuck Jaws

Home / Products / Lathe Chucks / Clamping Technology / Pneumatic Power Chucks / ROTA TB

ROTA TB

The ROTA TB self-contained power chuck from SCHUNK is equipped with an integrated pneumatic cylinder. The force transmission is effected by the proven wedge hook system. The chuck contains an air supply system on the distributor ring. Therefore no rotary feed throughs are necessary. Especially on machines without hydraulic clamping cylinders, the simple interchangeability is an advantage to replace manual chucks.


Versions:		3-jaw chuck / sizes 400 - 1000 mm

Base jaws:		Fine serration

Top jaws:		1/16" x 90° / 3/32" x 90°

Technical data and chuck jaws:
	ROTA TB 400-115

	ROTA TB 400-140

	ROTA TB 470-185

	ROTA TB 500-160

	ROTA TB 500-205

	ROTA TB 500-230

	ROTA TB 600-275

	ROTA TB 630-265

	ROTA TB 630-310

	ROTA TB 630-330

	ROTA TB 800-365

	ROTA TB 800-410

	ROTA TB 1000-534
	ROTA TB Introduction

	ROTA TB Complete overview

Operating Manual:

	TP/TP-LH/TB/TB-LH/EP/EP-LH Initial operation

	ROTA TB/TBS/EP

	Mounting advices - Mounting Power Lathe Chucks


	Function

Accessories:
	Top jaws and T-nuts

	Clamping ranges

Your advantages:		Your benefits:
Very large through-hole	>	Machining all standard bar-diameters

Safe lathe chuck process operation	>	Control of closing- and opening operation via electropneumatic safety control unit (SCHUNK ELKE 24/ESIS 24)

Wedge hook power chuck with integrated pneumatic cylinder	>	Suitable for conventional or cycle controlled lathes (without hydraulic clamping cylinder)

Very high clamping forces already at a standard air pressure of 6 bar	>	Useable pressure range between 2 and 8 bar

With distributor ring cover (only ROTA TP)	>	Better protection against contamination compared to our competitors

Perfectly suitable for lathes without hydraulic cylinder	>	Quick and easy changeover to manual lathe chucks

All sides of the functioning parts are ground and hardened	>	High T.I.R. and repeatability accuracy

Very large jaw stroke (only ROTA EP-LH/TB-LH)	>	Safe and variable clamping of workpieces over disturbing edges

Catalog Order

Contact